Peugeot 106 diesel (TUD5) won't start after HG replacement.

Discussion in 'Peugeot 106' started by uuuuiu, Aug 10, 2023.

  1. uuuuiu

    uuuuiu

    Joined:
    Aug 10, 2023
    Messages:
    1
    Likes Received:
    0
    I've just finished replacing the head gasket on my 106 diesel 1.5 and it's having difficulty starting. I've bled the fuel system a few times and it started up for a second or two with some easy start but then cuts out immediately after. Could it be that my timing is off on the injector pump?
     
    uuuuiu, Aug 10, 2023
    #1
  2. uuuuiu

    Old Pug

    Joined:
    Jul 10, 2023
    Messages:
    17
    Likes Received:
    1
    Location:
    UK
    These old diesels can be difficult to get all the air out of the system. The primer gets worn and is difficult to work properly. Have you also bled the injectors, by slackening the banjo’s and turning the engine over with the starter motor.
    Then double check the timing belt. It’s very simple one locking pin in the cam and crank, TWO in the pump.
     
    Old Pug, Aug 11, 2023
    #2
  3. uuuuiu

    Dekzion

    Joined:
    Jul 30, 2020
    Messages:
    5
    Likes Received:
    0
    Hey there, Did you get it sorted?
     
    Dekzion, Dec 9, 2023
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Diesel (TUD5) Woes - Won't start after head gasket & Cam Belt change.

  2. after new timing belt and head gasket, 205 won't start

  3. Pug 106 TUD5 diesel pump timing

  4. m reg 106 diesel won,t start

  5. 307SW 136 won['t start after going through big puddle ?

  6. Peugeot 806 People Carrier - Won't start after re-connecting Battery

  7. Peugeot 207 won’t fire up after battery became discharged.

  8. No start after balancer and serpentine belt replacement.

Loading...