106XRD Clutch Arm

Discussion in 'Peugeot 106' started by peug106, Mar 17, 2006.

  1. peug106

    peug106 Guest

    Hi,

    The clutch arm on my 106XRD has snapped. The garage has welded it as a
    temp job but said they can't replace the arm by itself, it will have to be
    a whole new clutch which will cost in the region of £350. Is there any way
    around this, e.g. driving with the welded arm? £350 seems a lot especially
    if it's only the arm that has broken.

    Morag
     
    peug106, Mar 17, 2006
    #1
  2. peug106

    nigel Guest

    Normally these arms break because the clutch assembly is hard to
    operate, therefore it would be as well to renew the clutch as well as
    the arm. By the way the arm comes as an assembly with the drop rod
    that holds the release bearing.
     
    nigel, Mar 17, 2006
    #2
  3. peug106

    Malc Guest

    When you say "the garage" have you shopped around? Clutch replacement prices
    vary wildly from HOW MUCH???? when you go to a main dealer to Hmm? from a
    small specialist or specialist clutch place.
     
    Malc, Mar 18, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 406 Arm Rest

  2. 307 lower arm bushes not covered by warranty?

  3. 307 HDI Lower arm bushes rattle/groan

  4. 106XRD Cold Start Problems

  5. Radius Arm- 106XRD

  6. rotor arm + resitor

  7. 406 1.9 TD 98 Rear suspension top arm bush

  8. LOWER SUSPENSION ARM - please help!!!!!!!

Loading...