1998 406 Clutch Problem

Discussion in 'Peugeot 406' started by Paul, Aug 14, 2006.

  1. Paul

    Paul Guest

    Just pulled in at home in the drive with the clutch pedal pressed on my
    Peugeot 406 Diesel. All of a sudden the car stalled and now the clutch pedal
    is right down at the floor and quite floppy. Any ideas as to what the fault
    is?
     
    Paul, Aug 14, 2006
    #1
  2. Paul

    Malc Guest

    Broken clutch cable or failed hydraulic cylinder.
     
    Malc, Aug 14, 2006
    #2
  3. Paul

    Paul Guest

    Car in Garage, apparently the clutch arm has 'shot forward' in some way
    pulling the cable and damaging it. They are looking at it tomorrow. Anyome
    else seen this?

    They just said £301-00 for a new clutch and cable if it is that. :(

    thanks...
     
    Paul, Aug 16, 2006
    #3
  4. Paul

    Paul Guest

    Problem was collapsed release bearing. New clutch and cable (cable was
    damaged by the clutch arm shooting forward as bearing collapsed). £300.
     
    Paul, Aug 20, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 306 clutch problem

  2. clutch problem 306

  3. 306 (1998 - XSi 2.0) - Dashboard problem

  4. Peugeot 306, 1998 1.6xs oil leak problem

  5. 306 1.6 xs 1998 idle problem

  6. 106XN 1998 gear selection problem

  7. 1998 306 1.6xs air con problem

  8. 106 XN 1998 Clock & Radio Problem

Loading...