2011 407 2.0 hdi running problems after engine change

Discussion in 'Peugeot 407' started by peter, Oct 27, 2015.

  1. peter

    peter

    Joined:
    Oct 27, 2015
    Messages:
    1
    Likes Received:
    0
    hello i am new to this forum looking for some help with my 2011 407 2.0 hdi 136bhp. the problems started when the cambelt snapped i sourced another engine same engine code (rhf) came as a complete engine fitted the engine in the car startedup wouldnt tick over knocking like mad when running. thought it could have been injectors and pump so changed them for the ones that were on my original engine still the same problem i have had it plugged in it is coming back with p1166, p1207, p2033 and p1210 the only 2 hard codes are p2033 and p1210 i am at a loss with this car now so any help would be appreciated thank you
     
    peter, Oct 27, 2015
    #1
  2. peter

    BadcarEurope

    Joined:
    Oct 28, 2015
    Messages:
    6
    Likes Received:
    1
    Don't you have any Peugeot specialist workshop in your neighbourhood?
     
    BadcarEurope, Oct 28, 2015
    #2
  3. peter

    kuda

    Joined:
    Sep 25, 2015
    Messages:
    52
    Likes Received:
    3
    hi! how are you? i think those injectors need to be coded to ECU, its come rail diesel, right. most common rail vehicles need the injector to be synchronized with the ECU
     
    kuda, Nov 1, 2015
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Diesel (TUD5) Woes - Won't start after head gasket & Cam Belt change.

  2. 406 HDi engine running fault

  3. Running problems

  4. front brakes seem weak after driveshaft change

  5. Diesel motor running cca 2 sec. after ignition key is switched to off

  6. 307 No headlights after bulb change

  7. 2011 expert speed limiter

Loading...