306 1.4 ’99 ECU question??

Discussion in 'Peugeot 306' started by Lozza, Apr 19, 2005.

  1. Lozza

    Lozza Guest

    HI

    Please help! I have had just about enough of my car. It’s just come
    out of the garage after having a new heater matrix put in and a new
    head gasket which has cost me a packet.

    Now it is not starting properly, jumpy when idle and stalling at
    traffic lights, it seems OK after a short while of driving and these
    problems are irratic. One other problem is it is not reaching high
    speeds as easily as before the new parts were put in. It has just been
    checked with a new coil pack, but has made no difference, does this
    mean it is the ECU?? or can this only be damaged if coil pack has
    gone??

    If it is neither of these please can you tell me what else it may be
    as I am at my wits end.

    Thanks in advance to anyone who can help!
    Lozza
     
    Lozza, Apr 19, 2005
    #1
  2. Lozza

    Tonyh Guest

    Hi, unlikely to be ECU, recheck the valve timing, (thats been touched
    during repairs and would dramatically affect power and tick over).
    Idler control valve not smooth ,clean up and lubricate, this no effect
    on power.
    T
     
    Tonyh, May 18, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.