306 Alarm

Discussion in 'Peugeot 306' started by bossman187uk, Mar 11, 2005.

  1. bossman187uk

    bossman187uk Guest

    My 306 has recently been leaking through ariel and damaged the alarm
    reciever that catches the signal from the key. can i just get one from
    another peugeot or do i have to get the key and reciever curcuit
    assigned?
    cheers
     
    bossman187uk, Mar 11, 2005
    #1
  2. bossman187uk

    Nigel Guest

    You can get a receiver from any 306 and then code the keys to the
    receiver yourself, as long as the keys are the infra-red type (red
    light on the plips). You do know how to code them in??
     
    Nigel, Mar 11, 2005
    #2
  3. bossman187uk

    bossman187uk Guest

    No i dont know how to code the key in. It is an infra red one and i
    only have the one key. I can see the water damage on the circuits
    around the sensor and it removes easily. I get mixed views, some
    people say i can just replace it and it only catches the signal and
    elsewere in car decides if its correct, other people say that the
    circuit itself decides if the frequency from the key is correct in
    which case i need the key n reciever to be matched. if i get another
    cercuit how do i asign the 1 key i have to it?
     
    bossman187uk, Mar 12, 2005
    #3
  4. bossman187uk

    Nigel Guest

    Assuming you have the two button plip:-
    Take the screw out of the plip and pull the key out of the plip. Put
    the key in the ignition and turn to the accessory position. You may
    need a pair of pliers to make it easier to turn the key in the
    ignition. Within 10 seconds hold the plip as close as possible to the
    receiver and press the large button until the red light stops
    flashing. (Either stays red or goes out, I can't remember which now)
    Then turn the ignition off, and try the plip. You may have to repeat a
    couple of times.
    If you have the single button type, then you will have to get a key
    already coded to the receiver from the dealer. (Loads of money and
    about 5 weeks to get from France. You will need the code number from
    the receiver) OR go to a scrappy and get a receiver and single button
    key(s).
     
    Nigel, Mar 12, 2005
    #4
  5. bossman187uk

    bossman187uk Guest

    Nice one mate thats a huge help. unfotunatly i have the single buttom
    key. im gonna try a scrapy like trents for both a key and matching
    reciever. any online places u know of? also will it effect the engine
    imobiliser?
     
    bossman187uk, Mar 15, 2005
    #5
  6. bossman187uk

    Nigel Guest

    No it won't affect the engine immobiliser.

    Try these two online scrappies.

    http://www.1stchoice.co.uk

    http://www.findapart.co.uk
     
    Nigel, Mar 15, 2005
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.