306 Radio

Discussion in 'Peugeot 306' started by SoundBytes, Jan 21, 2008.

  1. SoundBytes

    SoundBytes Guest

    Hi
    My dad has just bought a Peugeot 306 GLS could be a GLX (it's one or
    the other) anywho, the radio seems to be moulded into the dash, does anyone
    know if it can be taken out and a standard radio/cd player put in its place,
    is there a rectangular hole behind? if not has anyone sorted this sort of
    problem on this type of car before?

    Thanks in advance

    Gordon
     
    SoundBytes, Jan 21, 2008
    #1
  2. It is indeed a rectangular hole behind and you can obtain a shaped trim
    panel (Halfords I believe) that is made for exactly this purpose. Only
    problem you might have is getting the steering column stalk control working
    but you can get adapters for this that are made for several different
    radios.
     
    Keith Willcocks, Jan 21, 2008
    #2
  3. SoundBytes

    pogo306 Guest

    yes you can fit another radio there is a rectangular slot behind it but you
    will need to buy a dash board adaptor to replace the moulding
     
    pogo306, Jan 22, 2008
    #3
  4. SoundBytes

    Peter Chant Guest

    It's not essential, only need it if you want the new radio to sit flush. I
    replaced the one in my old L reg with a standard radio and it fitted fine
    with no moulding.
     
    Peter Chant, Jan 23, 2008
    #4
  5. SoundBytes

    SoundBytes Guest

    Hi

    Thanks for all you help

    Cheers

    Gordon

     
    SoundBytes, Jan 23, 2008
    #5
  6. I see the hijacking idiot is back.
     
    Keith Willcocks, Jan 24, 2008
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.