306 xsi overheating

Discussion in 'Peugeot 306' started by Katrina, Apr 23, 2006.

  1. Katrina

    Katrina Guest

    Can anyone help I'm really fed up with this.I had a new radiator fitted 1
    month ago and was told by the cowboy garage who fitted it that the fan
    wasn't working.might be thermostat or fan switch!!!!! I have replaced both
    of these with no luck! Could it be the electric fan and if so how can I test
    it before forking out 150 quid
     
    Katrina, Apr 23, 2006
    #1
  2. Katrina

    nigel Guest

    Take the connection off the rad switch. There are two or three wires
    to it. One of them is live with the ignition on. Make sure there is a
    feed to one of the wires. Make a note of which this is and connect a
    paper clip from that wire to one of the other wires. The fan should
    turn. If not then it's the motor. If no feed check the fuse.
     
    nigel, Apr 23, 2006
    #2
  3. Katrina

    dave Guest

    Thanks Nigel, have found a blown fuse and replaced it, but despite having a
    live feed I get a spark when the 2 wires are connected but no spinning of
    the motor. Have to get another motor....:-(
     
    dave, Apr 24, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. OVERHEATING 406 1.9TD WITH Air Con.

  2. Pug 306 Overheating - Any advice please ?

  3. pug 405 1.9td overheating

  4. 406Turbo Diesel (overheating? )

  5. HELP! My 306D cooling Fans will not come on, Engine overheating...

  6. overheating

  7. Peugeot 306 overheating

  8. 306 1.6 xs 1994, Misifiring when cold, Overheating on long journeys.

Loading...