307 electronics

Discussion in 'Peugeot 307' started by ABCD, May 16, 2005.

  1. ABCD

    ABCD Guest

    Good day,

    I've recently noticed some strange behaviour on my 2004, 1.6XT 307.

    When I unlock the doors from the remote it makes a double-unlock noise (like front then back), then when I switch on the ignition the wipers wipe once and the headlights flash once. Also, more often than not, the clock and calender have reset themselves.

    Any ideas on the cause of this?

    Thanks,
    Matt
     
    ABCD, May 16, 2005
    #1
  2. Seems like the Multiplex software/hardware in the BSI has thrown a wobbler.

    Proceed to your nearest dealer and have the fault investigate with the Diag machine.

    Shunt...
    Good day,

    I've recently noticed some strange behaviour on my 2004, 1.6XT 307.

    When I unlock the doors from the remote it makes a double-unlock noise (like front then back), then when I switch on the ignition the wipers wipe once and the headlights flash once. Also, more often than not, the clock and calender have reset themselves.

    Any ideas on the cause of this?

    Thanks,
    Matt
     
    The Shuntfield, May 16, 2005
    #2
  3. ABCD

    ABCD Guest

    Just received a letter from my local dealer telling me my 307 needs a BSI software download/upgrade.Apparently a worldwide thing........

    Going in on Saturday to get it done so hopefully this will fix the problem!!

    Matt

    Good day,

    I've recently noticed some strange behaviour on my 2004, 1.6XT 307.

    When I unlock the doors from the remote it makes a double-unlock noise (like front then back), then when I switch on the ignition the wipers wipe once and the headlights flash once. Also, more often than not, the clock and calender have reset themselves.

    Any ideas on the cause of this?

    Thanks,
    Matt
     
    ABCD, May 17, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.