307 Hdi 90 2001/51 'Pinking'

Discussion in 'Peugeot 307' started by Rob\(UK\), Apr 25, 2004.

  1. Rob\(UK\)

    Rob\(UK\) Guest

    Our 2001/51 307 Hdi 90 has been suffering a bit recently.
    When the engine is started in the morning, with the air-con off, the engine
    at idle does not run smoothly, but is quite erratic and lumpy. On 2 recent
    occasions having driven to the bottom of the road and dipped the clutch at
    the junction, the engine has cut-out. This is very unusual for a diesel.
    It's fair to say that this car has never run very smooth after starting, but
    these recent events have lead us to believe that there is something not
    quite right now.

    Also when driving while the engine is cold, there is a definite 'pinking'
    sound at revs of between 1000-2000RPM under gentle acceleration. I know
    diesels can be noisy when cold, but this just doesn't sound right. It sounds
    like a 'bag of nails' at times. When the engine has warmed up, the 'pinking'
    sound disappears and the engine runs smoothly.

    We recently had a 36K service. The dealer tested the car on a Diag2000 and
    found one of the glow plugs was faulty. We thought this might have cured the
    problems, but the 'pinking' sound is still present.

    I don't know if this diag 2000 checks that all the sensors are working,
    especially engine temperature. Does anyone know how thorough this equipment
    is? or have you experienced similar problems?

    We don't know what to do now, except may be trade in the car before the
    warranty runs out in October.

    Regards

    Robert
     
    Rob\(UK\), Apr 25, 2004
    #1
  2. Rob\(UK\)

    Michael Shaw Guest

    I had the stalling problem on a Citroen Berlingo, turned out to be the EGR
    valve.
     
    Michael Shaw, Apr 26, 2004
    #2
  3. Rob\(UK\)

    Rick Maninov Guest

    I had the same problem on a 305, it turned out to be the pump :-(
    May be worth checking the injectors first tho.

    Rick.
     
    Rick Maninov, Apr 26, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.