406 brake pad change

Discussion in 'Peugeot 406' started by Gingerpose, Sep 13, 2006.

  1. Gingerpose

    Gingerpose Guest

    Hi, I'm going to be changing the front pads on my 406 this afternoon. It's
    the 1.9 td, 96 model, with the pad wear sensors. Just wondered if anyone has
    done this recently and would have any tips or things I should watch out for
    when doing this.
    Cheers
    Ainslie
     
    Gingerpose, Sep 13, 2006
    #1
  2. Gingerpose

    Michael Roche Guest

    Make sure the connecting wires on the new pads are the same length as the
    old ones on some makers sets they are not also make sure they are routed
    correctly so they so not get rubbed by the wheel hub
    Mike
     
    Michael Roche, Sep 14, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. imobiliser key pad

  2. 406 LX 1997 1.9 Diesel - Key Pad Number Change

  3. Brake Pad light

  4. immobiliser pad

  5. 306 - squeaky wheel + Bosch caliper/pad instructions

  6. 406 Brake pad replacement - help req....

  7. peugeot 206 brake pad

  8. 407 rear brake pad replacement help

Loading...