406 fan problem - it doesn't work!

Hi guys.

Have a '97 406 2.1 diesel and the heater blower/fan has stopped
working. Has been a little temperamental of late and only worked on
full power. Something (sensor I guess) does click when the sliding
switch is about 2/3 of the way along, but no fan. Did see a previous
thread (which I can't find now!) that suggested giving the passenger
footwell a kick.......my sort of maintenance! Still to no avail though.

Anyone be able to point me in the right direction?

 

It's probably the connector to the fan motor in the passenger footwell
- a common problem. Stick your head under there and pull out any trim -
unscrew the plastic round thing with 3 screws - that's the motor - turn
your ignition on and fan on and wiggle the connectors will tell you
which one is loose. Disconnect it, crimp it up and re-connect and away
you go.

 

While you're at it check the motor is free to turn. Mine took out the
control unit + cost £700 to fix

 

i might know your problem it could be the brushes in the heater worn
out and
not contacting the only way is replacing the brushes or buying a new
fan
motor i dont think it is the sensor hope this helps.