406 Wiring info

Discussion in 'Peugeot 406' started by dreadly, Sep 16, 2005.

  1. dreadly

    dreadly Guest

    Hello.

    Is there a power take off at 12volts I can use to switch a relay that
    would only be live with a running engine?

    Andy
     
    dreadly, Sep 16, 2005
    #1
  2. dreadly

    johntyers Guest

    The nearest thing which comes to mind is the fuel pump power feed.

    John
     
    johntyers, Sep 18, 2005
    #2
  3. dreadly

    mindwipe Guest

    and the coil feed :)
     
    mindwipe, Sep 21, 2005
    #3
  4. dreadly

    Tonyh Guest

    Hi, fuel pump power feed and coils supply would always be on with ign
    I think. Depending on year and model there is a supply from alternator
    or ECU. This should give an indication of engine running. It is
    intended to close a relay for a/c operation. ie no pump clutch engaged
    on a stopped engine. If you have a/c take supply from activated a/c
    relay supply. If you dont have a/c, use supply to feed the new relay
    coil, with the other side of coil to ground.
    T.
     
    Tonyh, Sep 25, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Peugeot 307:Wiring RD3 + nvs 613.Does anybody knows more about the wiring?

  2. Clifford Alarm Info

  3. 2.1TD 406 Glow plug life - info

  4. looking for parts and info resources US

  5. [205] Retro fitting power steering - Any info?

  6. 406: other system info on computer?

  7. Clarion Radio Cassette Wiring Info ..... ?

  8. 406 - info on front foglights bulb replacement

Loading...