99 206 xs - Indicator Issue

Discussion in 'Peugeot 206' started by tom, Jul 23, 2006.

  1. tom

    tom Guest

    Hi

    Got the above car and it has an issue with the indicators and also main
    beam. If i use the indicator stalk to turn on the indicator nothing
    happens unless i twist the 'cowl' that covers the steering column to the
    left slightly. After i have done this the indicators work fine.

    I presume its just a loose connector or something but is this easy to
    dismantle and fit back together? Its getting a little annoying and was a
    bit dangerous until i could work out how to get them to operate.

    thanks

    Tom
     
    tom, Jul 23, 2006
    #1
  2. tom

    tom Guest

    no-one replied so i removed the cowling around the steering column and
    the wiring loom where it plugged into the indicator switch was loose so
    i clipped it back in and all is good again.
     
    tom, Jul 30, 2006
    #2
  3. tom

    tom Guest

    no-one replied so i removed the cowling around the steering column and
    the wiring loom where it plugged into the indicator switch was loose so
    i clipped it back in and all is good again.
     
    tom, Jul 30, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 206 radio issue

  2. 306 XSi Fuse issue

  3. 206 gti start issue

  4. Peugeot 309 Style 'STOP' Light issue

  5. Intermittant issue with starting my 406

  6. 2002 Peugeot 206 xsi suspected electrical issue plus other misc issues

  7. Central Locking issue and no electrics for 5 minutes?

  8. 206 Headlight Issue

Loading...