connect Blaupunkt cd changer

Discussion in 'General Motoring' started by Erik Klaassens, Nov 5, 2003.

  1. Erik Klaassens

    Erik Klaassens Guest

    After installing a Blaupunkt cd changer in my 307SW with standard Clarion
    radio, the radio doesnt seem to recognise my cd changer. It acts like it
    isn't there. Is there anything I should have done other than connect the
    leads?

    Thanks,
    Erik
     
    Erik Klaassens, Nov 5, 2003
    #1
  2. Erik Klaassens

    axl Guest

    yes, go to your dealer and have them adjust the setting of the radio so
    it will recognise the cd changer
     
    axl, Nov 5, 2003
    #2
  3. Erik Klaassens

    Erik Klaassens Guest

    Thanks Axl,

    any idea what they do when they ' adjust' the radio? Is this something I
    can do myself?

    Regards,
    Erik.
     
    Erik Klaassens, Nov 5, 2003
    #3
  4. Erik Klaassens

    Nigel Guest

    No! They use the Diag machine to enable the BSI to recognise the CD
    player. Should only take 15 minutes at the most.
     
    Nigel, Nov 5, 2003
    #4
  5. Erik Klaassens

    The Shuntfield Guest

    It must be a PSA/Blaupunkt changer, ie the one that the vehicle is normally
    supplied with by the OEM otherwise it still wont work and no matter how much
    programming they do.

    It has to be a Blaupunkt made for Peugoet Changer or forget it, it just will
    not work at all.

    The shunt...
     
    The Shuntfield, Nov 16, 2003
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Installing Blaupunkt cd changer

  2. 306 Blaupunkt PF3/C

  3. Blaupunkt replacement 406 HDi

  4. blaupunkt CD changer

  5. How do air con pipes connect?

  6. Connect MP3 player to radio

  7. "CONNECT" msg on OEM Clarion Audio System (CD)

  8. 307 5cd changer blaupunkt IDC-A09

Loading...