Dash access

Discussion in 'General Motoring' started by southpawArcher, Aug 15, 2004.

  1. southpawArcher

    southpawArcher Guest

    Hi all

    What is the best method to access the front passenger-door wiring loom
    (behind the dash) on a '98 306?

    I ask, because I've discovered that one of the speaker cable terminals
    (just one, tested the other OK with a cable-tester) has become
    disconnected/broken between the loom socket and the head-unit (very
    annoying!), and I'd like to attempt to reconnect it, before going the
    expensive route and venturing to a dealer.

    Any help and advice very much appreciated.


    TIA
     
    southpawArcher, Aug 15, 2004
    #1
  2. southpawArcher

    Tobias Meyer Guest

    Check the wires directly at the connector to the door first. There they rub
    and break quite easily.

    Tobi
     
    Tobias Meyer, Aug 15, 2004
    #2
  3. southpawArcher

    southpawArcher Guest

    Thanks. How do I get to this on the dashboard side? The break is between
    the loom socket on the chassis (not the door) and the head-unit plug.

    How can I check the cables? Can the socket be removed for inspection
    easily, and how I would I do that?
     
    southpawArcher, Aug 15, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 309 upper left dash light?

  2. 406 Coupe Alpine audio Fitting problem, sound to dash tweeters only

  3. 405 - How do I change bulb for ABS warning Light on Dash?

  4. Strange light on the dash coming on (306 Diesel)

  5. faulty starter motor - access

  6. Peugeot 807 Blocked front Washer Jets - Access to Wiper Blades

  7. Ventilation blower access

Loading...