Dual mass and clutch slip question any help welcome

Discussion in 'Peugeot 307' started by West-farr 307 2.0, Aug 9, 2023.

  1. West-farr 307 2.0

    West-farr 307 2.0

    Joined:
    Aug 8, 2023
    Messages:
    2
    Likes Received:
    0
    Hi thanks in advance I have a 2006 307 sxi hdi 2.0l and I have a bit of clutch slip. My question is can I just buy a clutch kit and fit that to the existing dual mass or has anyone done a solid flywheel conversion.
     
    West-farr 307 2.0, Aug 9, 2023
    #1
  2. West-farr 307 2.0

    Old Pug

    Joined:
    Jul 10, 2023
    Messages:
    17
    Likes Received:
    1
    Location:
    UK
    This job is very expensive labour wise, so it’s not worth it to skimp on parts.
    I’ve always said, if it comes with a DMF, keep it that way, fitting a solid kit can cause vibrations.
    GSF car parts are showing a solid kit for £382 and a DMF & clutch £310.
     
    Old Pug, Aug 10, 2023
    #2
    West-farr 307 2.0 likes this.
  3. West-farr 307 2.0

    West-farr 307 2.0

    Joined:
    Aug 8, 2023
    Messages:
    2
    Likes Received:
    0
    I've bought a dmf full kit and thanksbfor your reply
     
    West-farr 307 2.0, Aug 10, 2023
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 307 XSI - barmy HUD - any advise? (and a soft reset howto) - longish

  2. 106 - ECU problem - advice welcome please!!

  3. Clutch question

  4. 2003 gti sw does it have a solid or dual mass flywheel?

  5. Possible diesel knock ?? any help much appreciated

  6. Appreciate any help with my peugeot 307.

  7. Clutch/Dual Mass (or other problem) HDI 110

Loading...