Engine problem

Discussion in 'General Motoring' started by Nasher, Feb 18, 2006.

  1. Nasher

    Nasher Guest

    Hi
    I recently removed my rocker cover from my 97 306 xsi to replace the
    rubber gasket seal, put the rocker cover back on, turned on the enginge
    and it cut out after about 2 seconds. So i took off the cover to check and
    found a washer had fallen and jammed in the shaft. the washer has been
    removed but the car does not start. Any ideas or help much appreciated
     
    Nasher, Feb 18, 2006
    #1
  2. Nasher

    Chris Guest

    Cambelt snap?so look under the cover.sorry bad news?
     
    Chris, Feb 18, 2006
    #2
  3. Nasher

    nigel Guest

    Or jumped some teeth. Either way needs the belt covers coming off and
    seeing what has happened.
     
    nigel, Feb 18, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. [205] - Replacing 1360cc TU3S engine with 1.6GTi engine

  2. XU7 engine pinking problem

  3. 205 1.9 GTI Engine problem

  4. 1991 405GL Engine problem

  5. problem with fan in engine and blower fan in car

  6. Engine tempreture problem

  7. peugeot 206 engine problem

  8. Peugeot 407 Engine Engine Cease

Loading...