help with security code

Discussion in 'General Motoring' started by jimboy234, Dec 22, 2006.

  1. jimboy234

    jimboy234 Guest

    i own a 306 put the security code in wrong 3 times.. what do i
    do.????
     
    jimboy234, Dec 22, 2006
    #1
  2. i'm not shure. but try to remove the panel, disconnect it and short the two
    pins of the connector
     
    Christian Schubert, Dec 22, 2006
    #2
  3. jimboy234

    Dragon Guest

    If you are talking about radio security code--
    If 306 is same as 206--
    Then disconnect battery for a while.
    On reconnection you get another 3 goes.
    I wonder how I know!!!

    Henry
     
    Dragon, Dec 22, 2006
    #3
  4. jimboy234

    Wichita Guest

    Same on a 405, or you can hold down some combination and it will reset.
    Not sure, but vaguely remember holding down the band selector for 15seconds.
     
    Wichita, Dec 23, 2006
    #4
  5. jimboy234

    Brian Guest

    If you are talking about radio security code--
    15seconds.

    It would help if the OP would come back to confirm this, but many of the
    earlier 306s had a code panel built in to the engine immobiliser. Nothing to
    do with the radio.
     
    Brian, Dec 25, 2006
    #5
  6. jimboy234

    Rog Guest

    If the keypad is the same as a 106 a 30 minute wait is required, although
    having done this myself, and being in a hurry, disconnecting the battery
    lead speeded things up...
    Rog
     
    Rog, Dec 29, 2006
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.