Key won't go into ignition

Discussion in 'General Motoring' started by Dave soper, Feb 28, 2016.

  1. Dave soper

    Dave soper

    Joined:
    Feb 28, 2016
    Messages:
    1
    Likes Received:
    0
    Hi can anybody help... I parked up earlier and locked car.. upon returning I tried to insert key into ignition but it won't go all the way in so I can't start the car.. I Googled this and it came up that it's because the pin that goes through the hole on the end of the key must be stuck or jammed across which is stopping key from being fully inserted.. can anybody help with how I can mend it etc... I've tried wd40 but that didn't work
     
    Dave soper, Feb 28, 2016
    #1
  2. Dave soper

    kuda

    Joined:
    Sep 25, 2015
    Messages:
    52
    Likes Received:
    3
    Hi! is your car a 405 or 206? is your car an automatic? strip the covers on your steeering column, try inserting the key whilst you tapping the barrel.
     
    kuda, Mar 20, 2016
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. add cd changer into 206SW (or new radio)

  2. Damaged door/ignition key

  3. Having big problems plugging antenna into new stereo - blows stereo

  4. 307 - beeps when ignition key turned?

  5. Key won't go in ignition

  6. Diesel motor running cca 2 sec. after ignition key is switched to off

  7. Straightening Key / Replacement Key cost for 2005 206

  8. Fan comming on when key is in ignition (406 1.9Diesel 1998)

Loading...