Lambda replacement question

Discussion in 'General Motoring' started by Len Cuff, May 6, 2006.

  1. Len Cuff

    Len Cuff Guest

    Replaced the lambda sensor on son's 306 XSi this afternoon as Pug
    dealer said it was showing a fault code. Wiring was exactly the same
    colours so no problem there and it came out fairly easily ! Problem is
    that the engine management light is still on and it idles roughly
    still. Obvious question -- does he now need to take it back and have
    the fault cleared from the ECU or is there any other way to reset it?

    TIA


    cheers,
    Len
     
    Len Cuff, May 6, 2006
    #1
  2. Len Cuff

    daddyfreddy Guest

    Go here: http://www.peugeotdiesel.com

    It'll tell you how to read and clear the fault codes.
     
    daddyfreddy, May 6, 2006
    #2
  3. Len Cuff

    Len Cuff Guest

    Many thanks, I'll give it a try. Read the page and it looks like I
    should really clear all the faults/codes and see what happens!

    cheers,
    Len
     
    Len Cuff, May 6, 2006
    #3
  4. Len Cuff

    Len Cuff Guest

    Seems all is sorted now. He disconnected the battery for 10 minutes
    and it's running very sweet now!

    Thanks the help and advice.

    cheers,
    Len
     
    Len Cuff, May 7, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. what can "destroy" the lambda probe?

  2. Pug 306 Lambda system control problem

  3. 206cc Radio/CD replacement question

  4. 306Xsi Lambda sensor

  5. Lambda wiring 306 XSi?

  6. 307SW Modified replacement flywheel question

  7. 206 lambda question

Loading...