peugeot 206 rev counter

Discussion in 'Peugeot 206' started by binz, Feb 17, 2007.

  1. binz

    binz Guest

    my rev counter on my 98 peugeot 206 will not work the speedo and fuel
    gage etc all work normally can anyone tell me whats wrong and is this
    going to cost me a fortune :?
     
    binz, Feb 17, 2007
    #1
  2. binz

    Gary G Jones Guest

    I had the same with my hdi vans rev gauge, its basically either the sender
    gear unit by the gearbox, or the actual rev gauge itself. Mine was the
    actual gauge, Peugeot dealer said it would be around £350 all in to replace
    just the rev gauge. I managed to get a complete instrument panel off ebay
    for £40 took about 5 minutes to change and all has been fine since.
    Does the rev gauge move at all when you turn the ignition on?

    GGJ
     
    Gary G Jones, Feb 17, 2007
    #2
  3. binz

    binz Guest

    hi , no the needle doesnt even flicker when i turn the ignition on
    sounds like i need to look for a new unit thanks :D
     
    binz, Feb 19, 2007
    #3
  4. binz

    Gary G Jones Guest


    Sounds like the gauge itself. Mine in the van did absolutely nothing when
    switched on or running. I did take it to Peugeot to confirm the gauge or the
    sender, which they did but it cost me £30 for the confirmation. Maybe worth
    the £30 just to make sure. Unless you happen to know someone else with a 206
    you could whip the instrument panel out off for a minute or so to try it.


    GGJ
     
    Gary G Jones, Feb 19, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.