Peugeot passenger aibag

Discussion in 'General Motoring' started by tissours, Feb 5, 2005.

  1. tissours

    tissours Guest

    Can any one help me i need to disarm the passenger airbag on the 406 there
    is no key slot on this year (S reg) is there a fuse or a connection that
    can be pulled out because we need to fit a child seat in it as the seat
    will not fit properly on the rear.

    Thanka
    Alan
     
    tissours, Feb 5, 2005
    #1
  2. tissours

    RichardT Guest

    I strongly recommend that you keep your fingers off, take her to a dealer
    for a properly done job..
    // RichardT
     
    RichardT, Feb 6, 2005
    #2
  3. tissours

    Nik&Andy Guest

    But you can remove the glove box and disconnect the yellow wire behind the
    airbag holster.
    I would strongly recommend you to take it to a proper auto electrician and
    have them fit a proper switch somewhere for it though that is operated by a
    key and gives you a warning light when switched off.

    Andy
     
    Nik&Andy, Feb 6, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.