pug 106

hi can anyone help????????????

I have no main beam but all other lights work ok. Have changed switch, bulbs
and fuses. Have run out of ideas

 

Do you have a multimeter? If so (and they're only £5 from Maplin) then you
can check whether you have 12V on the connector to the bulbs. You can also
check earth continuity back to the battery negative. Presumably you have
both main beams out? If so it's likely to be either the switch in the
steering column or a relay. Just checked the Haynes BoL and it says Bulb
blown, corroded contacts on bulb or holder, fuse, relay, broken, loose or
disconnected wiring or faulty switch.

--
Malc

If you're swimming in a creek
And an eel bites your cheek
That's a moray