rear mount

Hi Group.
Has anybody done a rear engine mount on a pug 405? if so is it easy
todo. or do you have to remove the whole unit and hit the bush very
hard to remove it.and risk braking the unit.

thanks for any replys.

 

Do not even attempt to hit it out. If you don't break the unit, you
will probably bend it. It is only ally. It must be pressed out and in.
If you don't have access to a press and a close fitting drift to use
to press it out, then get the whole unit which comes with the bush
already fitted.
Also the bush has to be fitted a certain way or you'll get vibration
from the engine.