Reset of key remote on 02 406

Discussion in 'Peugeot 406' started by The Bushes, Apr 3, 2004.

  1. The Bushes

    The Bushes Guest

    I have just bought an 02 406 Hdi estate but the key fob will not operate the
    locks etc due to the battery having been replaced on the car and hence the
    electrical system disconnected. The reset procedure in the manual does not
    rectify the problem.
    Any tricks to get it cure it before I go to a dealer?
     
    The Bushes, Apr 3, 2004
    #1
  2. The Bushes

    paul_diagtech Guest

    I presume the vehicle starts with the key you have?

    If they do then you need to resync the remotes. Turn ignition on (not
    start) press and hold remote button (the key in ignition) for at least 10
    seconds, release button and turn ignition off. Leave for a few seconds and
    try!

    Good luck,

    Paul.
     
    paul_diagtech, Apr 20, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Peugeot 406 Remote Key Programming?

  2. 406 key remote problems

  3. 205 Remote C/L Plip/Key

  4. 405 Peugeot Remote Key Fob

  5. 306 key remote

  6. 406 remote key - again!

  7. Remote key question (from the UK)

  8. 406 Key Remote solution

Loading...