What about my 406 brakes then???????

Discussion in 'Peugeot 406' started by Conzo, Oct 17, 2006.

  1. Conzo

    Conzo Guest

    Hi can anyone help.?

    I have a 406 2.0l petrol executive turbo 1998. It doesn't get out much

    now but for some reason the brake pedal is now taking 10 seconds to
    return to normal position. Hence light staying on too long. One day
    after lying for weeks not being used it just appeared like this.


    The brakes work fine. ABS works fine, fluid levels ok.


    I suspect master cylinder related but am not sure.


    Does any one have any ideas??


    Cheers.
     
    Conzo, Oct 17, 2006
    #1
  2. Conzo

    Fitzy. Guest

    Check the pedal return spring (if fitted) should be located just above the
    pedal somewhere near the brake switch,
    don't know if your car has one,, but worth a look,
    Fitzy
     
    Fitzy., Oct 18, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 306- idle too high for a while then settles down

  2. 306 ('98) Airbag warning light flashes for 5 min then steady

  3. tyre pressures - cold - what about normal temp

  4. 1995 306 Dturbo - How many miles will it do then?

  5. 405 turbo diesel starts, idles, then smokes like a trooper..

  6. S and winter flashing and then dash appear

  7. Know nothing about the 106.....what should I look for?

  8. 806 engine fades then picks up again at about 2500 revs feels if turbo kicks in

Loading...