Windscreen Wipers on 1998 Peugeot 406

Discussion in 'Peugeot 406' started by vinnyh via CarKB.com, Mar 22, 2007.

  1. Mine only come off the windscreen about 2 inchs. Right pain to change the
    blades.
    Is this right for them to be so restricted?
     
    vinnyh via CarKB.com, Mar 22, 2007
    #1
  2. vinnyh via CarKB.com

    Gingerpose Guest

    Yup
     
    Gingerpose, Mar 22, 2007
    #2

  3. You could of course remove the bonnet but it is probably not advisable ;o)
     
    Keith Willcocks, Mar 22, 2007
    #3
  4. Isn't there some way of stopping them in the more or less vertical position?
    Turning the ignition off fr'instance.
    My 807 has a cunning system involving the interaction of the wiper and
    ignition switches which I can never remember but sometimes results in the
    wipers parking themselves vertically when I don't want them to.

    Ron Robinson
     
    R.N. Robinson, Mar 22, 2007
    #4
  5. vinnyh via CarKB.com

    Gingerpose Guest

    Wouldn't help, it's the design of the arm which restricts movement.

    Ainslie
     
    Gingerpose, Mar 22, 2007
    #5
  6. undo bolt at base of windscreen wiper arm then take arm off toral time
    10 mins for both sides
     
    juliancroucher, Mar 29, 2007
    #6
  7. That's longer than it took me to change the blades even with the lack of
    lift on the arm. Lift lever, unhook blade, hook on new blade and push
    lever down again. I am not really sure what the OP was complaining about.
     
    Keith Willcocks, Mar 30, 2007
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.